betvlctor伟德国际

<p id="ptfrh"></p>
<address id="ptfrh"><address id="ptfrh"><nobr id="ptfrh"></nobr></address></address>

    <noframes id="ptfrh">

    <address id="ptfrh"><address id="ptfrh"><menuitem id="ptfrh"></menuitem></address></address>

          Loading...
          Contact Us
          Hammond & Company Ltd
          Finway Road
          Hemel Hempstead
          Hertfordshire
          HP2 7PT
          England
          +44 (0)1442 212 211
          +44 (0)1442 252 003
          Send a Message
          We'll respond within 48 business hours
          Gundrill Diagram

          Before drilling commences the gun drill must be suported by a guide bush or pre-drilled start hole. Coolant is delivered directly to the cutting edges through the hollow shank and the chips are evacuated back along the V configuration of the tip and shank.

          The periphery of the cutting tip is contoured in such a way as to provide both support pads and lubrication galleries. The forces generated by the single sided cutting action act directly on the support pads creating a burnished surface finish and size control down to IT7 tolerances.

          Gun drill tips can be manufactured with a step that has either a cutting, or non cutting pilot. Coated tips are also available upon request. These may have a TiN (Titanium Nitride) coating, or a TiAlN (Titanium Aluminium Nitride) coating.

          A regrinding service is available at our Hemel Hempstead factory for gun drills, Ventec drills and Speedfeed drills.
          Hardened steel guide bushes and whip guides are available for purchase. See accessories.
          Driver Design Ref d h h1
          View PDF
          HAMMOND STANDARD
          Diagram
          CA 16 40  
          CB 25 50  
          CC 35 60  
          AMERICAN STANDARD
          Diagram
          Diagram
          AA 1/2" 38 26
          DM 3/4" 70 46
                 
                 
                 
          AC 1.00" 70 55
          AD 1.25" 70 55
          AE 1.50" 70 55
          EUROPEAN STANDARD
          Diagram
          AF 10 40 24
          AK 16 45 31
          AG 20 70 34
          AH 25 70 34
          AJ
          32
          70
          34
           
          Driver Design Ref d h h1
          Diagram AN 16 50 47
          WELDON
          Diagram
            BF 16 48 24
          h2 BG 20 50 25
          17 BH 25 56 32
          19 BJ 32 60 36
          19
          BK 40 70 40
          Diagram DG 10 60 M6X0.5
          DH 16 80 M10X1.0
          DK 25 100 M16X1.5
          DL 36 120 M25X1.5

          Ordering Information


          When ordering Gun Drills please state diameter, overall length, driver design and, where possible, the material to be cut. There are numerous cutting geometries available for the Gun Drills carbide tip.
          Alternatively, go towards the end of this website and order by Product Codes.


          Cutting Head Contours



             
          View PDF
             

          Tubular Shank Dimensions


          Hammond gun drill shanks are manufactured from high quality chrome molybdenum steel and are designed to achieve maximum coolant flow, chip clearance and torsional rigidity.

          ? Range ? Tube ? D Range ? Tube ? D Range ? Tube
          3,00-3,14 2,8 6,50-6,99 6,2 13,90-14,89 13,4
          3,15-3,39 2,95 7,00-7,29 6,7 14,90-15,89 14,4
          3,40-3,64 3,2 7,30-7,59 7,0 15,90-16,89 15,3
          3,65-3,87 3,45 7,60-7,94 7,3 16,90-17,89 16,2
          3,88-3,99 3,65 7,95-8,34 7,6 17,90-18,89 17,2
          4,00-4,19 3,8 8,35-8,54 8,0 18,90-19,89 18,2
          4,20-4,44 4,0 8,55-8,94 8,2 19,90-20,89 19,2
          4,45-4,74 4,25 8,95-9,34 8,6 20,90-21,89 20,2
          4,75-4,97 4,55 9,35-9,94 9,0 21,90-22,89 21,2
          4,98-5,24 4,75 9,95-10,64 9,6 22,90-23,89 22,2
          5,25-5,49 5,0 10,65-10,94 10,3 23,90-24,89 23,2
          5,50-5,74 5,25 10,95-11,94 10,6 24,90-26,89 24,2
          5,75-5,94 5,5 11,95-12,54 11,6 26,90-28,89 26,2
          5,95-6,29 5,7 12,55-12,94 12,2 28,90-30,89 28,2
          6,30-6,49 6,0 12,95-13,89 12,6 30,90-33,00 30,2
          Updated August 2013

          Hammond Recommended Geometry for Various Materials



          View PDF
          Drill Diameter. Primary Land Chamfer at 20°
          ? 3,0 to 12,0 0,4 – 0,6 0,4 – 0,6
          ? 12,0 to 25,0 0,6 – 0,8 0,6 – 0,8
          ? 25,0 to 32,0 0,8 – 1,2 0,8 – 1,2
          Diagram Diagram

          Facet Description NG4 Aluminium
          (Order code B)
          NG13 Grey Cast Iron
          (Order code E)
          NG80 Flat Bottom
          (Order code G)
          Horiz. Vertical Horiz. Vertical Horiz. Vertical
          A  Outer Primary +15° +15° +40° +12° +1° +12°
          B Outer Secondary +14,5° +20° +39,5° +25° +1° +20°
          C Inner Relief -20° +15° -20° +12°
          D  Front Clearance +25° +35°
          E Oil Dub-Off -25° -15° -25° -12° 25° -12°
          Point Position D/4 D/4 D/2
          Facet Description NG82 Super Alloys
          (Order code H)
          NG86 Wood Grind
          (Order code K)
          NG90 Malleable MATL
          (Order code L)
          Horiz. Vertical Horiz. Vertical Horiz. Vertical
          A  Outer Primary +42° +14° +30° +20° +20° +20°
          B Outer Secondary +41,5° +25°
          C Inner Relief -17° +14° -20° +20° -20° +20°
          D  Front Clearance +30° +30° +25°
          E Oil Dub-Off -22° -15° -25° -15° -25° -15°
          Point Position D/5 D/3,5 D/4

          Cutting Parameters


          Gun drills operate at relatively high cutting speeds with low feeds per revolution. Approximate starting values are shown in the charts on this page.


          View PDF
          Diagram
          Feed rates are critical to chip formation. The values shown here may need to be adjusted for optimum results.


          Diagram
          Reliable chip evacuation and good surface finish can only be ensured if sufficient coolant volume and pressure are available.

          Pressure and volume vary according to length/diameter ratio.


          Diagram
          Chart shows maximum unsupported flute length


          Diagram
          <p id="ptfrh"></p>
          <address id="ptfrh"><address id="ptfrh"><nobr id="ptfrh"></nobr></address></address>

            <noframes id="ptfrh">

            <address id="ptfrh"><address id="ptfrh"><menuitem id="ptfrh"></menuitem></address></address>

                  video

                  news

                  culture

                  image

                  Real estate

                  Mobile phone

                  society

                  Technology

                  game